- IEC 60335 Test Finger Nail
- 2017-12-14 21:11
- The Finger Nail Probe is indicated test IEC60335 and UL requirements. Used to check the security of parts that snap together. The spring gauge assembled in the handle can be calibrated to the neccessary force for using the instrument. This probe is m...
- Gauge Go No Go for E14, B22, E17, E27, E40, GU10, GU5.3 lamp cap
- 2017-12-01 03:57
- According to the requirement of IEC 60061, Chuangxin produced high accuracy and high quality "Go" and "Not go"gauge
• CX-E27 is for E27 lamp cap standard source measurement. It includes 7006-27B-1, 7006-28A-1, 7006-27C-1, 7006-50-1, 7006-51A-2, 7006...
- Calibration Device for Spring Impact Hammer
- 2017-11-16 23:18
- Principle of calibration:
The principle of this calibration procedure is to compare the energy provided by a spring hammer, which is difficult to measure directly, to the energy of a pendulum, calculated from its mass and height of fall. And it's ...
- G5 Gauge
- 2017-11-09 20:10
- According to the requirement of IEC 60061, Chuangxin produced high accuracy and high quality "Go" and "Not go"gauge
• CX-E27 is for E27 lamp cap standard source measurement. It includes 7006-27B-1, 7006-28A-1, 7006-27C-1, 7006-50-1, 7006-51A-2, 7006...
- Short Pin Test Probe 13 for IEC 61032+60335+61032
- 2017-11-07 03:30
- The model short Test Pin Probe is used to test for accessibility of small objects and meets IEC, CSA and UL requirements. The probe is made of stainless steel with a Delrin® handle. Meets IEC 60950 and 61032, as well as other national and internation...
- IEC60061-3 Go No Go Gauge for E26 Lamp Cap Gage
- 2017-10-13 04:09
- According to the requirement of IEC 60061, Chuangxin produced high accuracy and high quality "Go" and "Not go"gauge
• CX-E27 is for E27 lamp cap standard source measurement. It includes 7006-27B-1, 7006-28A-1, 7006-27C-1, 7006-50-1, 7006-51A-2, 7006...
- GU5.3 Gauge
- 2017-10-09 07:13
- According to the requirement of IEC 60061, Chuangxin produced high accuracy and high quality "Go" and "Not go"gauge
• CX-E27 is for E27 lamp cap standard source measurement. It includes 7006-27B-1, 7006-28A-1, 7006-27C-1, 7006-50-1, 7006-51A-2, 7006...
- IEC60335-2-9 Test Prots
- 2017-09-26 07:02
- IEC60335-2-9 Figure 104 Test Pots for testing induction hotplates (IEC60335-2-6 Fig. 102)
1: The pots are made of low carbon steel having a maximum carbon content of 0.08%.
2: The pots are met the requirements of IEC 60335-2-9 Fig. 103, IEC60335-...